SEALS Inch T-Seals CPS Capped Piston T-Seals

CPS Capped Piston T-Seals

A heavy duty double-acting assembly, the capped piston T-seal exhibits excellent sealability, extrusion resistance and wearability. T-seals with 'BR' suffix utilize a Bronze Filled PTFE cap instead of the standard Glass Filled PTFE cap.

INSTALLATION OF PTFE PISTON SEALS
Installing PTFE piston seals is not always an easy task. The use of installation tools (Designated by a 'CTC-' product code prefix) is recommended but often not convenient when working with a wide variety of sizes and applications. Finger installations are practical with rings of smaller cross-sections. Using fingers or a rounded plastic stick, knead the ring over the piston into the groove. With rings of larger cross-sections it may be necessary to heat the ring. Warming the ring in water or oil at 130° F or 140° F for about 5 minutes will soften the material for easier installation. Always avoid inconsistent stretching or overstretching of the PTFE seal.

To prevent the PTFE ring from snapping into the wrong groove, cover wear ring grooves with plastic tape.

After seal installation, assembly of the cylinder may be difficult if the piston seal is loose on the piston or the cylinder has an inadequate leading edge chamfer. In such cases, compress the piston seal with belting or a suitable hose clamp. If the piston seal must pass threads or any other sharp edges during the cylinder assembly, cover the edges with plastic tape or wrap.

SEAL INFORMATION
MATERIAL PTFE CAP
NYLON BACK-UP
RUBBER ENERGIZER
TEMPERATURE RANGE -40° to +220° F
PRESSURE RANGE 0 to 6,000 PSI
SPEED 4.5 FT/SPEED>
PART NUMBER (Prefix) - (Bore Size)

Products

CPS-10000
SKU: CPS-10000
CPS-10000, 10in. CAPPED SEAL, STANDARD PISTON SEALS
$265.76
Quantity
CPS-10000BR
SKU: CPS-10000BR
CPS-10000BR, PA-BTFE-9-1/4x10x3/4
$278.75
Quantity
CPS-11000BR
SKU: CPS-11000BR
CPS-11000BR, PA-BTFE-10-1/4x11x3/4
$278.93
Quantity
CPS-12000BR
SKU: CPS-12000BR
CPS-12000BR, PA-BTFE-11.275x12.000x0.750
$325.42
Quantity
CPS-13000BR
SKU: CPS-13000BR
CPS-13000BR, PA-BTFE-12.275x13.000x0.750
$385.86
Quantity
CPS-14000BR
SKU: CPS-14000BR
CPS-14000BR, PA-BTFE-13.275x14.000x0.750
$410.98
Quantity
CPS-15000BR
SKU: CPS-15000BR
CPS-15000BR, PA-BTFE-14.270x15.000x0.750
$466.76
Quantity
CPS-16000BR
SKU: CPS-16000BR
CPS-16000BR, PA-BTFE-15-1/4x16x3/4
$502.08
Quantity
CPS-1750BR
SKU: CPS-1750BR
CPS-1750BR, 1 3/8X1-3/4X.414, STANDARD PISTON SEALS
$64.69
Quantity
CPS-2000
SKU: CPS-2000
CPS-2000, PA-TFE-1.625x2x0.424, STANDARD PISTON SEALS
$69.39
Quantity
CPS-2500
SKU: CPS-2500
CPS-2500, PA-TFE-2.125x2.5x0.424, STANDARD PISTON SEALS
$72.43
Quantity
CPS-2750BR
SKU: CPS-2750BR
CPS-2750BR, PA-TFE-2.375x2.75x0.424, STANDARD PISTON SEALS
$97.92
Quantity