SEALS Inch Piston U-Seals UKP Piston U-Seals

UKP Piston U-Seals

UKP u-seals are designed to act as a positive sealing, low friction replacement for conventional rubber u-seals. Molded from polyurethane, UKP u-seals provide long life and high resistance against extrusion. Low friction allows these seals to run smoothly in lubricated or non-lubricated cylinder. Available for bore sealing, the flexible dynamic lip provides very low breakaway friction and steady motion.

SEAL INFORMATION
MATERIAL 90A URETHANE
TEMPERATURE RANGE -40° to +200° F
PRESSURE RANGE 0 to 150 PSI
SPEED 3 FT/SEC
PART NUMBER (Prefix)(CS) - (Outside Diameter)

Products

UKP09-0.37
SKU: UKP09-0.37
UKP09-0.37, PUS-90URE-3/8x3/16x3/32, STANDARD U-SEALS
$6.62
Quantity
UKP09-0.68
SKU: UKP09-0.68
UKP09-0.68, PUS-90URE-11/16x1/2x3/32, STANDARD U-SEALS
$4.38
Quantity
UKP12-0.56
SKU: UKP12-0.56
UKP12-0.56, PUS-95URE-5/16X9/16X1/8, STANDARD U-SEALS
$5.62
Quantity
UKP12-0.62
SKU: UKP12-0.62
UKP12-0.62, PUS-95URE-3/8X5/8X1/8, STANDARD U-SEALS
$5.66
Quantity
UKP12-0.75
SKU: UKP12-0.75
UKP12-0.75, PUS-95URE-1/2X3/4X1/8, STANDARD U-SEALS
$5.70
Quantity
UKP12-0.87
SKU: UKP12-0.87
UKP12-0.87, PUS-95URE-5/8X7/8X1/8, STANDARD U-SEALS
$5.72
Quantity
UKP12-1.00
SKU: UKP12-1.00
UKP12-1.00, PUS-90URE-1x3/4x1/8, STANDARD U-SEALS
$5.75
Quantity
UKP12-1.06
SKU: UKP12-1.06
UKP12-1.06, PUS-95URE-13/16X1-1/16X1/8, STANDARD U-SEALS
$5.75
Quantity
UKP12-1.12
SKU: UKP12-1.12
UKP12-1.12, PUS-90URE-1-1/8x7/8x1/8, STANDARD U-SEALS
$5.75
Quantity
UKP12-1.25
SKU: UKP12-1.25
UKP12-1.25, PUS-95URE-1X1-1/4X1/8, STANDARD U-SEALS
$5.81
Quantity
UKP12-1.50
SKU: UKP12-1.50
UKP12-1.50, PUS-90URE-1-1/2x1-1/4x1/8, STANDARD U-SEALS
$10.15
Quantity
UKP12-2.00
SKU: UKP12-2.00
UKP12-2.00, PUS-90URE-2x1-3/4x1/8, STANDARD U-SEALS
$10.23
Quantity